|
|
楼主 |
发表于 2006-8-6 13:24:48| 字数 3,236| - 中国–浙江–杭州 电信
|
显示全部楼层
电源
M2-ATX 160W
- 160 watts output
- Ideal car Power supply for operating P4, P4-M, Celeron, AMD systems
- ATX, 6-24V wide input range
- Intelligent shutdown controller
- ON/OFF motherboard control
- Survives vehicle engine cranks
- Battery deep discharge prevention
- High efficiency, 160 watts output
- "Anti-Thump" Amplifier remote control
- 15A automotive fuse (mini-blade)
- VIA, P4 and AMD CPU support
- ROHS compliant version (limited qty, EU customers first)
M2-ATX is an intelligent, high power, vehicle (car / boat / electric cart) 12V DC-DC ATX PC power supply designed for car pc and battery powered applications. Designed to provide power and to control the ON/OFF switch of a motherboard (car PC) based on ignition status, M2-ATX is a wide input (6 to 24V) vehicle / car / battery operated ATX power supply capable of surviving tough car engine cranks (down to 6V) as well as transient over-voltage situations. Just connect it to your car / boat / RV / solar battery and power up your PC!
The M2-ATX comes with complete cable harness consisting of:
- ATX cable extender plus HDD and Floppy power (9inch)
- Power input cable harness terminated in 0.25' fastons (12inch)
- 2 pin M/B on/off power ON control wire harness (9inch)
- set of LBJ (little black jumpers) to control various power sequencing schemes
(Optional)
- P4-12V to P4-12V cable (optional accessory)
M2-ATX has 8 user selectable microcontroller driven timing modes, allowing you to choose up to 8 ignition/shutdown car pc timing schemes via a built-in shutdown controller. By removing all user-selectable jumpers, M2-ATX becomes a traditional PC PSU with no ignition control (shudown controller bypassed) and it can be used in non-vehicle computer applications.
Even if your computer is totally OFF, a PC will still consume a few hundered milliwatts, needed to monitor PC ON/OFF status. When the computer (car pc) is in the suspend/sleep mode, it will consume even more power, because the RAM needs to be powered at all times. The power consumption in the suspend mode is few watts. No matter how big your car battery is, it will eventually drain your vehicle / car battery in a matter of days.
While in deep sleep mode, M2-ATX constantly monitors your car battery voltage levels, preventing deep discharge situations by automatically shutting down (using a built-in shutdown controller) until battery levels reach safe levels again. No more dead car batteries, no more computer resets during engine cranks, along with multiple timing schemes, small formfactor and very competitive price makes the M2-ATX the premier solution for dc-dc ATX vehicle / car PC power supply solutions.
M2-ATX is formfactor compatible with VoomPC car PC enclosure and with most Casetronics and Morex enclosures and it is footprint compatible with the M1-ATX. The same version of microcode will run on both M1-ATX and M2-ATX.
NOTE: M2-ATX provides up to 8A on the 12V rail, making it ideal for operating most P4, P4-M, Celeron, AMD systems. Low power Geode and VIA processors (C3, C7) will work as well, leaving ample power for 12V or 5V peripherials (multiple 3.5" hard drives, CDROM, etc).
Other timing schemes / designs are possible. OEM / reseller integration is welcome. Please send en email to m1-atx@mini-box.com with your custom requirements.
DC6V-24V宽电压输入范围, 160W输出
CPU and Board支持：VIA X86 CPUs, PII, PIII and low po P4/AMD*
Supports all VIA mini-ITX motherboards
内建智能开关机控制器
内含15A车用薄型保险丝
电瓶深度放电预防
(*NOTE: Check the total 12V rail power consumption)
M2-ATX是专为CarPC设计的智能型电源供应模块，M2-ATX的设计是藉由引擎的启动装置来控制电脑主板的开关机。
M2-ATX可以透过JUMPER(跳线)来设置微型延时开关控制器的关机时刻(可以分8段设置)，或是您亦可以设定为非车用模式。
当非智能型的电源模块直接连接在汽车电瓶上时，即使您的计算机完全关闭，计算机也会消耗一些电流用来监测计算机开关状态。当计算机在车用suspend或sleep工作模式下，消耗的瓦数将会更多，因为RAM(内存)需要一直供给电源。在这样的情况下，无论您的汽车电瓶再大，终将会消耗掉，而M2-ATX将为您在计算机移动应用方面提供最佳的防护。 |
本帖子中包含更多资源
您需要 登录 才可以下载或查看，没有账号？注册
x
|
狗仔卡
离线
提升卡
置顶卡
变色卡
